Related Experiment Video
Updated: Apr 27, 2026

Author Spotlight: Technologies and Challenges in Elemental Analysis of Food Samples
Published on: December 22, 2023
Determination of water-soluble and insoluble elements in PM2.5 by ICP-MS
M Manousakas1, H Papaefthymiou1, K Eleftheriadis2
1Department of Chemistry, University of Patras, 265 00 Rio-Patras, Greece.
Abstract:
The elemental composition of water-soluble and acid-soluble fractions of PM2.5 samples from two different Greek cities (Patras and Megalopolis) was investigated. Patras and Megalopolis represent different environments. Specifically, Patras is an urban environment with proximity to a large port, while Megalopolis is a small city located close to lignite power plants. Both cities can serve as a representative example of European cities with similar characteristics. The concentration of 14 elements (As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Fe, Sr, Ti, V and Zn) was determined in each fraction by ICP-MS. Microwave assisted digestion was used to digest the samples using a mixture of HNO3 and HF. For the determination of the water soluble fraction, water was chosen as the simplest and most universal extraction solvent. For the validation of the extraction procedure, the recoveries were tested on two certified reference materials (NIST SRM 1648 Urban Particulate Matter and NIST 1649a Urban Dust). Results showed that Zn has the highest total concentration (273 and 186 ng/m(3)) and Co the lowest (0.48 and 0.23 ng/m(3)) for Patras and Megalopolis samples, respectively. Nickel with 65% for Patras and As with 49% for Megalopolis displayed the highest solubility, whereas Fe (10%) and Ti (2%) the lowest ones, respectively.
Related Concept Videos
Inductively Coupled Plasma–Mass Spectrometry (ICP–MS): Overview
Inductively Coupled Plasma-Mass Spectrometry (ICP-MS): Interferences
Precipitation and Co-precipitation
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Precipitation Gravimetry
In determining nickel by gravimetric analysis, a precipitant of ethanolic dimethylglyoxime is added to a hot nickel salt solution. This is quickly followed by the dropwise addition of dilute ammonia solution until precipitation occurs. A...
Atomic Emission Spectroscopy: Lab

