Related Experiment Video
Updated: Apr 27, 2026

Interactive and Visualized Online Experimentation System for Engineering Education and Research
Published on: November 24, 2021
Second-order integral sliding-mode control with experimental application
1Mustafa Kemal University, Department of Electrical & Electronic Engineering, 31200 Hatay, Turkey.
Abstract:
In the present study, a second-order sliding-mode controller is proposed for single-input single-output (SISO) uncertain real systems. The proposed controller successively overcomes the variations caused by the uncertainties and external load disturbances although an approximate model of the system is used in the design procedure. An integral type sliding surface is used and the stability and robustness properties of the proposed controller are proved by means of Lyapunov stability theorem. The chattering phenomenon is significantly reduced adopting the switching gain with the known parameters of the system. Thus, the proposed controller is suitable for long-term application to the real systems. The performance of the proposed control scheme is validated by a real system experiments and the results are compared with the similar controllers presented in the literature.
More Related Videos
10:11Temperature-Controlled Assembly and Characterization of a Droplet Interface Bilayer
Published on: April 19, 2021
09:01Gain-compensation Methodology for a Sinusoidal Scan of a Galvanometer Mirror in Proportional-Integral-Differential Control Using Pre-emphasis Techniques
Published on: April 4, 2017
Related Concept Videos
PI Controller: Design
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
PID Controller
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...