Ultrahigh responsivity and external quantum efficiency of an ultraviolet-light photodetector based on a single VO₂
1Department of Materials Science and Engineering, National Tsing Hua University , 101, Section 2 Kuang Fu Road, Hsinchu 300, Taiwan.
Abstract:
We demonstrated a single microwire photodetector first made using a VO2 microwire that exhibted high responsivity (Rλ) and external quantum efficiency (EQE) under varying light intensities. The VO2 nanowires/microwires were grown and attached on the surface of the SiO2/Si(100) substrate. The SiO2 layer can produce extremely low densities of long VO2 microwires. An individual VO2 microwire was bonded onto the ends using silver paste to fabricate a photodetector. The high-resolution transmission electron microscopy image indicates that the nanowires grew along the [100] axis as a single crystal. The critical parameters, such as Rλ, EQE, and detectivity, are extremely high, 7069 A W(-1), 2.4 × 10(10)%, and 1.5 × 10(14) Jones, respectively, under a bias of 4 V and an illumination intensity of 1 μW cm(-2). The asymmetry in the I-V curves results from the unequal barrier heights at the two contacts. The photodetector has a linear I-V curve with a low dark current while a nonlinear curves was observed under varing light intensities. The highly efficient hole-trapping effect contributed to the high responsivity and external quantum efficiency in the metal-oxide nanomaterial photodetector. The responsivity of VO2 photodetector is 6 and 4 orders higher than that of graphene (or MoS2) and GaS, respectively. The findings demonstrate that VO2 nanowire/microwire is highly suitable for realizing a high-performance photodetector on a SiO2/Si substrate.
