Fate of phosphorus in diluted urine with tap water
Xiaoning Liu1, Guoqi Wen1, Huihui Wang1
1College of Resources and Environment, University of Chinese Academy of Sciences, Beijing 100049, China.
Abstract:
P loss during the fresh urine storage process is inevitable because of the presence of Ca and Mg. Dilution is one of the most important parameters influencing urine composition and subsequent P recovery. This study aimed to investigate the fate of P in urine with different dilution ratios (Vwater/Vurine, i.e., 0/100, 25/75, 50/50 and 75/25). The results indicate that the percentage of P loss increased from 43% to 76% as the dilution ratio increased from 0/100 to 75/25 because of more Ca and Mg obtained from tap water. Meanwhile, P removal efficiency through struvite precipitation decreased from 51% to 8% because of lower supersaturation ratio as a result of dilution. Struvite crystals with high purity were still obtained even under a dilution ratio of 50/50 urine solution. Batch experiments were also performed to study the influence of temperature (15-35°C) on P recovery and crystal size. For different dilution ratios of urine solutions, no significant discrepancy for the P removal efficiencies were observed at 15 and 35°C, whereas the P removal efficiencies at 25°C showed an increasing gap with those at 15 and 35°C. The largest average crystal sizes were found at 25°C, which was opposite to the trend of P removal efficiency.
Related Concept Videos
The Phosphorus Cycle
Factors Affecting Solubility
Phosphate Buffer
Sodium dihydrogen phosphate does not fully dissociate in neutral or acidic solutions. When a strong base, such as sodium hydroxide (NaOH), is introduced into the solution, sodium dihydrogen phosphate...
Formation of Dilute Urine
Filtrate Osmolarity in the PCT
Initially, as the filtrate passes through the proximal convoluted tubule (PCT), its...
Renal Drug Excretion: Effect of Urine pH, Flow Rate, and Drug pKa
The pKa of a...
Urine: Physical and Chemical Properties
The concentration of these solutes varies, with urea being the most abundant nitrogenous waste product. Other solutes include sodium, chloride, potassium, phosphate,...


