High performance ZnO-SnO₂:F nanocomposite transparent electrodes for energy applications

Enhancing the propagation length of light without sacrificing the electro-optical properties of transparent electrodes is of particular interest to solar cells for reaching higher efficiency. This can typically be achieved by nanostructured electrodes but all too often at the expense of complexity and cost-effectiveness. In this work, we demonstrate the simple and low-cost fabrication of a new type of ZnO-SnO2:F nanocomposite thin film by combining spin-coated ZnO nanoparticles on glass with fluorine-doped SnO2 thin films deposited by atmospheric spray pyrolysis. The resulting nanocomposites exhibit a dual surface morphology featuring rough ZnO-SnO2:F nanostructures along with the original smooth SnO2:F thin film. By readily modulating the surface morphology of ZnO-SnO2:F nanocomposite thin films with the initial ZnO NP surface coverage, the scattering efficiency of the incident light can remarkably be controlled over the 400-1100 nm solar spectrum wavelength range. High quality hazy ZnO-SnO2:F thin layers are therefore formed with an averaged haze factor ranging from 0.4 to 64.2% over the 400-1100 nm solar spectrum range while the sheet resistance is kept smaller than 15 Ω/sq for an average total optical transmittance close to 80%, substrate absorption and reflection included. Eventually, optical simulations using Fourier transform techniques are performed for computing the obtained haze factors and show good agreement with experimental data in the 400-1100 nm solar spectrum wavelength range. This opens up additional opportunities for further design optimization of nanoengineered transparent electrodes.