Related Experiment Video
Updated: Apr 26, 2026
Synthesis of Metal Nanoparticles Supported on Carbon Nanotube with Doped Co and N Atoms and its Catalytic Applications in Hydrogen Production
Published on: December 6, 2021
Leaf-templated synthesis of 3D hierarchical porous cobalt oxide nanostructure as direct electrochemical biosensing
Lei Han1, Da-Peng Yang2, Aihua Liu1
1Laboratory for Biosensing, Qingdao Institute of Bioenergy & Bioprocess Technology, and Key Laboratory of Biofuels, Chinese Academy of Sciences, 189 Songling Road, Qingdao 266101, China; University of Chinese Academy of Sciences, 19A Yuquan Road, Beijing 100049, China.
Abstract:
A novel three-dimensional (3D) hierarchical porous cobalt oxide (Co3O4) architecture was first synthesized through a simple, cost-effective and environmentally friendly leaf-templated strategy. The Co3O4 nanoparticles (30-100 nm) with irregular shapes were interconnected with each other to form a 3D multilayer porous network structure, which provided high specific surface area and numerous electrocatalytic active sites. Subsequently, Co3O4 was successfully utilized as direct electrochemical sensing interface for non-enzymatic detection of H2O2 and glucose. By using chronoamperometry, the current response of the sensor at +0.31 V was linear with H2O2 concentration within 0.4-200 μM with a low limit of detection (LOD) of 0.24 μM (S/N=3) and a high sensitivity of 389.7 μA mM(-1) cm(-2). Two linear ranges of 1-300 μM (with LOD of 0.1 μM and sensitivity of 471.5 μA mM(-1) cm(-2)) and 4-12.5 mM were found at +0.59 V for glucose. In addition, the as-prepared sensor showed excellent stability and anti-interference performance for possible interferents such as ascorbic acid, uric acid, dopamine, acetaminophen and especially 0.15 M chloride ions. Similarly, other various metal oxide nanostructures may be also prepared using this similar strategy for possible applications in catalysis, electrochemical sensors, and fuel cells.
