Related Experiment Video
Updated: Apr 25, 2026

Determination of the Settling Rate of Clay/Cyanobacterial Floccules
Published on: June 11, 2018
Flocculation of algal cells by amphoteric chitosan-based flocculant
Changlong Dong1, Wei Chen2, Cheng Liu2
1College of Environment, Hohai University, Nanjing 210098, PR China.
Abstract:
A kind of amphoteric chitosan-based flocculant (quaternized carboxymethyl chitosan, denoted as QCMC) has been prepared. QCMC presented significant improvement of water solubility in the whole pH range. The effects of pH, dosage, temperature and original turbidity of algal water on the flocculation performance were investigated. The optimal dosages of QCMC at pH 5, 9 and 12 with original turbidity of 20NTU at 20°C were 0.1, 0.6 and 2.0mg/L, respectively, which were much less than that of chitosan, PAM, Al2(SO4)3 and FeCl3. The floc properties during grow, breakage and regrow period were also evaluated at different pH values in terms of floc size, strength and density. It was demonstrated that QCMC produced larger, stronger and denser flocs than Al2(SO4)3. There is every indication that QCMC is more suitable for algal harvesting than other traditional coagulants or flocculants.
Related Concept Videos
Coagulation
Colloidal precipitates
Colloids
The Colloidal State
Factors Affecting Solubility
Other Algae

