Immobilized iron oxide nanoparticles as stable and reusable catalysts for hydrazine-mediated nitro reductions in...

An experimentally easy to perform method for the generation of alumina-supported Fe3O4 nanoparticles [(6±1) nm size, 0.67 wt %]and the use of this material in hydrazine-mediated heterogeneously catalyzed reductions of nitroarenes to anilines under batch and continuous-flow conditions is presented. The bench-stable, reusable nano-Fe3O4@Al2O3 catalyst can selectively reduce functionalized nitroarenes at 1 mol % catalyst loading by using a 20 mol % excess of hydrazine hydrate in an elevated temperature regime (150 °C, reaction time 2-6 min in batch). For continuous-flow processing, the catalyst material is packed into dedicated cartridges and used in a commercially available high-temperature/-pressure flow device. In continuous mode, reaction times can be reduced to less than 1 min at 150 °C (30 bar back pressure) in a highly intensified process. The nano-Fe3O4@Al2O3 catalyst demonstrated stable reduction of nitrobenzene (0.5 M in MeOH) for more than 10 h on stream at a productivity of 30 mmol h(-1) (0.72 mol per day). Importantly, virtually no leaching of the catalytically active material could be observed by inductively coupled plasma MS monitoring.