Ozonation and peroxone oxidation of ethylenethiourea in water: operational parameter optimization and by-product
1Department of Sanitary and Environmental Engineering, Universidade Federal de Minas Gerais, Belo Horizonte, 31270-901, Brazil.
Abstract:
The objective of this work was to study the degradation and mineralization of ethylenethiourea (ETU) in water by ozonation at different pH values and in the presence of hydrogen peroxide. Degradation experiments were performed using an initial ETU concentration of 50 ppm for 180 min with a gas flux of 0.25 dm(3) min(-1) and an O3 production rate of 12.1 mg min(-1). Degradation of by-products was monitored by direct injection electrospray ionization mass spectrometry (ESI-MS), ETU concentration was determined by HPLC-UV, and its mineralization was detected by total organic carbon (TOC) analysis. Optimum degradation of ETU in water was observed at pH = 11, whereas at pH = 3, the degradation of ETU was slowest, indicating that the reaction occurred through different mechanisms. The additional effects of hydroxyl radicals formed at the highest pH can be used to explain the results obtained in this study. Peroxone experiments were carried out in the presence of 400 and 800 mg L(-1) H2O2; the degradation of ETU was faster at 400 mg L(-1) H2O2. This was attributed to the scavenging effect of the excess H2O2. ETU treatment by ozonation produced several by-products of degradation such as ethylene urea and 2-imidazoline.
More Related Videos
Related Concept Videos
02:23Autoxidation of Ethers to Peroxides and Hydroperoxides
02:04Oxidation of Alkenes: Anti Dihydroxylation with Peroxy Acids
01:46Oxidative Cleavage of Alkenes: Ozonolysis
Ozone is a symmetrical bent molecule stabilized by a resonance structure.
02:44Oxidation of Alkenes: Syn Dihydroxylation with Osmium Tetraoxide
03:08Hydroboration-Oxidation of Alkenes
03:00Preparation of Epoxides
Epoxides result from alkene oxidation, which can be achieved by a) air, b) peroxy acids, c) hypochlorous acids, and d) halohydrin cyclization.
Epoxidation with Peroxy Acids
Epoxidation of alkenes via oxidation with peroxy acids involves the conversion of a carbon–carbon double bond to an epoxide using the oxidizing agent meta-chloroperoxybenzoic acid, commonly known as MCPBA. Since the O–O bond of peroxy acids is very weak, the addition of electrophilic oxygen of peroxy...