Effect of methotrexate on the mechanical properties and microstructure of calcium phosphate cement

Calcium phosphate cement (CPC) is widely used as an antitumor bone-filling material. Methotrexate (MTX) is recognized as an effective chemotherapy medicine. The current study examined the effects of MTX on the mechanical properties and microstructure of CPC. Methotrexate-loaded CPC at mass ratios of 0%, 0.1%, 0.2%, and 0.5% were designated as groups A, B, C, and D, respectively, and were pressed into precast cylindrical molds. Solidification time, axial compressive strength, transverse compressive strength, and rotational tensile strength were measured, and scanning electron microscopy images were captured before and after MTX-CPC microstructure changes occurred. Average initial and final setting times increased gradually with increasing drug concentration, but this increase was not significant among the groups. Average axial transverse compressive strength and rotational tensile strength of groups B and C were not significantly different from those of group A (P>.05); however, there was a significant difference in these properties between groups A and D (P<.05). Scanning electron microscopy observations showed a porous crystalline structure. The addition of MTX to CPC does not significantly affect the basic crystal structure and setting time of CPC. Adding MTX at mass ratios of 0.1% and 0.2% to CPC does not lead to a significant difference in mechanical strength and can therefore be applied in clinical practice. This study may shed some light on the future application of MTX-loaded CPC in the treatment of bone defects after tumor excision.