Related Experiment Video
Updated: Apr 23, 2026

Neutron Radiography and Computed Tomography of Biological Systems at the Oak Ridge National Laboratory's High Flux Isotope Reactor
Published on: May 7, 2021
Spectral correction factors for conventional neutron dosemeters used in high-energy neutron environments
1Institute of Nuclear Engineering and Science, National Tsing Hua University, 101 Sec. 2, Kung Fu Road, Hsinchu 300, Taiwan, R.O.C. Institute of Nuclear Energy Research, Lungtan, Taoyuan, Taiwan, R.O.C.
Abstract:
High-energy neutrons (>10 MeV) contribute substantially to the dose fraction but result in only a small or negligible response in most conventional moderated-type neutron detectors. Neutron dosemeters used for radiation protection purpose are commonly calibrated with (252)Cf neutron sources and are used in various workplace. A workplace-specific correction factor is suggested. In this study, the effect of the neutron spectrum on the accuracy of dose measurements was investigated. A set of neutron spectra representing various neutron environments was selected to study the dose responses of a series of Bonner spheres, including standard and extended-range spheres. By comparing (252)Cf-calibrated dose responses with reference values based on fluence-to-dose conversion coefficients, this paper presents recommendations for neutron field characterisation and appropriate correction factors for responses of conventional neutron dosemeters used in environments with high-energy neutrons. The correction depends on the estimated percentage of high-energy neutrons in the spectrum or the ratio between the measured responses of two Bonner spheres (the 4P6_8 extended-range sphere versus the 6″ standard sphere).
More Related Videos
Related Concept Videos
Biological Effects of Radiation
NMR Spectrometers: Resolution and Error Correction
Atomic Emission Spectroscopy: Overview
Atomic Nuclei: Nuclear Spin State Population Distribution
Absorption of Radiation

