Related Experiment Video
Updated: Apr 23, 2026

A Filter-based Surface Enhanced Raman Spectroscopic Assay for Rapid Detection of Chemical Contaminants
Published on: February 19, 2016
On the feasibility of near infrared spectroscopy to detect contaminants in water using single salt solutions as model
A A Gowen1, F Marini2, Y Tsuchisaka3
1School of Biosystems Engineering, University College Dublin, Dublin, Ireland; Biomeasurement Laboratory, Kobe University, Kobe, Japan.
Abstract:
This research work evaluates the feasibility of NIRS to detect contaminants in water using single salt solutions as model systems. Previous research has indicated the potential of near infrared spectroscopy (NIRS) for detecting solutes in water; however, a comprehensive investigation of the limit of detection of this technique has not been carried out. Near infrared transmittance spectra of aqueous salt solutions in the concentration range 0.002-0.1 mol L(-1) (equivalent to 117-13,334 ppm or 0.0001-0.01% mass/mass) were investigated. The first overtone region of the near infrared spectrum (1300-1600 nm) was found to be the most effective wavelength range for prediction of salt concentration in aqueous solutions. Calibration models built using this wavelength range and employing the extended multiplicative scatter spectral pre-treatment resulted in root mean squared error of prediction values ranging from 0.004 to 0.01 mol L(-1). The limit of detection (LOD) was estimated to be of the order of 0.1% (mass/mass) or 1000 ppm. Within the framework of Aquaphotomics, it was possible to examine the effect of different salts on the NIR spectra of water in the first overtone range. Our results were confirmed through test experiments at various geographical locations employing dispersive and Fourier transform type NIRS instruments.
More Related Videos
06:50O-cresol Concentration Online Measurement Based On Near Infrared Spectroscopy Via Partial Least Square Regression
Published on: November 8, 2019
09:51TD-DFT Guided Advanced E-Eye Sensing Technique for On-site Quantification of Fe, Cr, F, and As in the Environmental, Biological, and Food Samples
Published on: September 19, 2025
Related Concept Videos
Applications of IR Spectroscopy: Overview
Determining the pH of Salt Solutions
High-Performance Liquid Chromatography: Types of Detectors
UV–Vis Spectrometers