Improved signal-to-noise ratio for non-perpendicular detection angles in x-ray fluorescence computed tomography...

The standard imaging setup in x-ray fluorescence computed tomography detects the fluorescence emission at a right angle with respect to the axis of the excitation beam. In this paper we have studied how the detection angle affects the signal-to-noise ratio (S/N), which is a major factor influencing the low-contrast sensitivity of the imaging system. This is done for an imaging setup using a collimated detector and a pencil beam of excitation x-rays. An ideal detection process is simulated for a generalized imaging case with gold/platinum tracers and experimental measurements are performed using a diagnostic x-ray tube. For monochromatic excitation, the results indicate that order-of-magnitude improvements of the S/N can be achieved by optimizing the detection angle. The maximal S/N, when exciting with an energy just above the K-edge, is achieved for large detection angles, i.e. with the detector close to the source. The improvements also transfer to polychromatic excitation sources and the experimental results show up to four-fold improvements of the S/N when changing the detection angle from 90° to 150°. Also, the changes of the S/N behavior when switching the fluorescent tracer is briefly demonstrated. These results suggest that the choice of detection angle should be taken seriously in the design of future XFCT imaging systems.