Related Experiment Video
Updated: Apr 21, 2026

Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for CuII Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
Removal of sulfur compounds from petroleum refinery wastewater through adsorption on modified activated carbon
Ichrak Ben Hariz1, Foued Al Ayni2, Lotfi Monser1
1Laboratoire de Chimie Analytique et d'Electrochimie, Université de Carthage, Institut National des Sciences Appliquées et de Technologie, B.P. 676, 1080 Tunis, Tunisia
Abstract:
The adsorption of sulfur compounds from petroleum refinery wastewater on a chemically modified activated carbon (MAC) was investigated. The modification technique (nitric acid, hydrogen peroxide and thermal modification) enhanced the removal capacity of carbon and therefore decreases cost-effective removal of sulfide from refinery wastewater. Adsorption equilibrium and kinetics data were determined for sulfur removal from real refinery wastewater. The data were evaluated according to several adsorption isotherm and kinetics models. The Freundlich isotherm fitted well with the equilibrium data of sulfur on different adsorbents, whereas the kinetics data were best fitted by the pseudo-second-order model. Insights of sulfide removal mechanisms indicated that the sorption was controlled through the intraparticle diffusion mechanism with a significant contribution of film diffusion. The MAC adsorbent was found to have an effective removal capacity of approximately 2.5 times that of non-modified carbon. Using different MAC, sulfides were eliminated with a removal capacity of 52 mg g(-1). Therefore, MAC can be utilized as an effective and less expensive adsorbent for the reduction of sulfur in refinery wastewater.
More Related Videos
Related Concept Videos
Bioremediation
Microbial Bioremediation of Hydrocarbons
Electrophilic Aromatic Substitution: Sulfonation of Benzene
Sulfur Assimilation
Microbes and the Sulfur Cycle
Acid Mine Drainage

