Related Experiment Video

Updated: Apr 21, 2026

Simultaneous Measurement of Turbulence and Particle Kinematics Using Flow Imaging Techniques
10:53

Simultaneous Measurement of Turbulence and Particle Kinematics Using Flow Imaging Techniques

Published on: March 12, 2019

6.7K

Integration of UAV photogrammetry and SPH modelling of fluids to study runoff on real terrains

Anxo Barreiro1, Jose M Domínguez1, Alejandro J C Crespo1

  • 1EPHYSLAB Environmental Physics Laboratory, Universidade de Vigo, Ourense, Spain.

Plos One
|November 6, 2014
PubMed

More Related Videos

Image-based Lagrangian Particle Tracking in Bed-load Experiments10:32

Image-based Lagrangian Particle Tracking in Bed-load Experiments

Published on: July 20, 2017

10.4K
Quantitatively Measuring In situ Flows using a Self-Contained Underwater Velocimetry Apparatus SCUVA09:22

Quantitatively Measuring In situ Flows using a Self-Contained Underwater Velocimetry Apparatus SCUVA

Published on: October 31, 2011

15.7K

Related Concept Videos

Uniform Depth Channel Flow: Problem Solving01:18

Uniform Depth Channel Flow: Problem Solving

To calculate the flow rate for a trapezoidal channel, first, identify the bottom width, side slope, and flow depth of the channel. The cross-sectional area (A) corresponding to the depth of flow (y), channel bottom width (B), and side slope (θ) is determined by:Next, calculate the wetted perimeter, which includes the bottom width and the sloped side lengths in contact with the water. Using the values of the cross-sectional area and the wetted perimeter, determine the hydraulic radius by...
692
Modeling and Similitude01:12

Modeling and Similitude

Scaled modeling is a fundamental technique in engineering, enabling the study of large and complex systems by creating smaller, manageable replicas that recreate critical characteristics of the original. In hydrology and civil infrastructure, for example, scaled models of dams help analyze water flow, turbulence, and pressure. This method allows for accurate predictions of real-world behavior within a controlled environment, significantly reducing the cost and time involved in full-scale...
792
Applications of Integration to Find Hydrostatic Pressure01:30

Applications of Integration to Find Hydrostatic Pressure

Hydrostatic force is a fluid's total force at rest on a surface. For a horizontal surface submerged at a fixed depth, the pressure is constant and calculated as the product of fluid density, gravitational acceleration, and depth. In the case of a vertical dam wall submerged in water, this force is not evenly distributed due to the increasing pressure with depth. This variation arises from the cumulative weight of the water above each point. Integration is used to account for the continuous...
332
Precipitation Gravimetry01:03

Precipitation Gravimetry

Precipitation gravimetry is based on converting an analyte into a sparingly soluble precipitate, which is separated by filtration and weighed. An ideal precipitate should be pure, insoluble, of known composition, and easily filtered from the reaction mixture.
In determining nickel by gravimetric analysis, a precipitant of ethanolic dimethylglyoxime is added to a hot nickel salt solution. This is quickly followed by the dropwise addition of dilute ammonia solution until precipitation occurs. A...
12.4K
Uniform Depth Channel Flow01:27

Uniform Depth Channel Flow

Uniform depth channel flow keeps fluid depth consistent along channels such as irrigation canals. In natural channels, such as rivers, approximate uniform flow is often assumed. This condition occurs when the channel’s bottom slope matches the energy slope, balancing potential energy lost from gravity with head loss due to shear stress. This balance prevents depth changes along the channel length, resulting in a steady, uniform flow.Uniform flow in open channels with a constant...
843
Precipitation Processes01:12

Precipitation Processes

The experimental conditions in a gravimetric analysis should be optimized to maximize the particle size and purity of the obtained precipitate. Ideally, the concentration of the precipitating reagent should be low with effective stirring to maintain low relative supersaturation for the growth of large crystals. In homogeneous precipitation, the precipitant is slowly generated by a chemical reaction in the solution to avoid local reagent excesses. For example, urea decomposes gradually to...
5.0K