Design of a sorbent to enhance reactive adsorption of hydrogen sulfide

A series of novel zinc oxide-silica composites with three-dimensionally ordered macropores (3DOM) structure were synthesized via colloidal crystal template method and used as sorbents for hydrogen sulfide (H2S) removal at room temperature for the first time. The performances of the prepared sorbents were evaluated by dynamic breakthrough testing. The materials were characterized before and after adsorption using scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption, X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). It was found that the composite with 3DOM structure exhibited remarkable desulfurization performance at room temperature and the enhancement of reactive adsorption of hydrogen sulfide was attributed to the unique structure features of 3DOM composites; high surface areas, nanocrystalline ZnO and the well-ordered interconnected macroporous with abundant mesopores. The introduction of silica could be conducive to support the 3DOM structure and the high dispersion of zinc oxide. Moisture in the H2S stream plays a crucial role in the removal process. The effects of Zn/Si ratio and the calcination temperature of 3DOM composites on H2S removal were studied. It demonstrated that the highest content of ZnO could reach up to 73 wt % and the optimum calcination temperature was 500 °C. The multiple adsorption/regeneration cycles showed that the 3DOM ZnO-SiO2 sorbent is stable and the sulfur capacity can still reach 67.4% of that of the fresh sorbent at the fifth cycle. These results indicate that 3DOM ZnO-SiO2 composites will be a promising sorbent for H2S removal at room temperature.