Related Experiment Video
Updated: Apr 20, 2026

Quantum State Engineering of Light with Continuous-wave Optical Parametric Oscillators
Published on: May 30, 2014
Temperature insensitive, high-power cascaded optical parametric oscillator based on an aperiodically poled lithium
Abstract:
We report a novel temperature insensitive, APMgLN-based, high-power cascaded optical parametric oscillator (OPO) pumped by an Ytterbium-doped fiber laser. A monolithic APMgLN crystal was designed to compensate the phase mismatches for the nonlinear conversions from the pump to the idler and the primary signal to the idler simultaneously in a wide temperature range. Efficient parametric conversion with pump-to-idler conversion efficiency over 15% and slope efficiency higher than 20% was realized from 25 °C to 55 °C. The idler wavelength was down-shifted from 3.82 μm to 3.78 μm accordingly during the temperature rise. The highest idler power of 4.1 W at 3.8 μm under the pump power of 26.5 W was recorded which was improved by ~32% in pump-to-idler conversion efficiency when compared with the PPMgLN-based conventional OPO, in which the highest idler output power was 3.1W under the same pump and thermal condition.

