Soil flushing of cresols contaminated soil: application of nonionic and ionic surfactants under different pH and...

In this study, the viability of soil flushing on the removal of cresols (meta-, ortho-, and para-cresols) from contaminated soil has been investigated. High production and distribution of cresols in the environment indicate their potential for a widespread exposure to humans. The presence of these compounds in soil could cause a significant threat to environment, as they are toxic and refractory in nature. Cresols are persistent chemicals which are classified by the United State Environmental Protection Agency (U.S.EPA) as Group C, possible human carcinogens. Soil flushing is one of the soil remediation technologies which could by applied for treatment of hydrocarbon contaminated soil. Flushing of the contaminated soil samples was carried out by using sodium dodecyl sulfate (SDS) and Triton X-100 surfactant solutions at the concentrations of 0.1%, 0.2%, 0.3%, and 0.4% (W/W). Three acidic, neutral, and alkaline environments were utilized by adjusting pH of the washing solutions at 3, 7 and 12 to evaluate the effect of washing environment in removing cresols. The results of this research denote that the highest removal efficiencies of 79.6% and 83.51% were achieved for m-cresol and total o- and p-cresols, respectively, under the alkaline environment of pH12 at 0.4% (W/W) SDS concentration. Regarding performance of Triton X-100, the removal efficiencies of 80.26% and 80.14% for the above cresols were attained under similar conditions. Hence, illustrating the effectiveness of surfactants in soil flushing remediation of cresols contaminated soil.