Related Experiment Video
Updated: Apr 20, 2026

Enhanced Oil Recovery using a Combination of Biosurfactants
Published on: June 3, 2022
Removal of 226Ra and 228Ra from TENORM sludge waste using surfactants solutions
M F Attallah1, Mostafa M Hamed1, E M El Afifi1
1Hot Laboratories and Waste Management Center, Atomic Energy Authority of Egypt, PO.13759 Cairo, Egypt.
Abstract:
The feasibility of using surfactants as extracting agent for the removal of radium species from TENORM sludge produced from petroleum industry is evaluated. In this investigation cationic and nonionic surfactants were used as extracting agents for the removal of radium radionuclides from the sludge waste. Two surfactants namely cetyltrimethylammonium bromide (CTAB) and Triton X-100 (TX100) were investigated as the extracting agents. Different parameters affecting the removal of both (226)Ra and (228)Ra by the two surfactants as well as their admixture were studied by the batch technique. These parameters include effect of shaking time, surfactants concentration and temperature as well as the effect of surfactants admixture. It was found that, higher solution temperature improves the removal efficiency of radium species. Combined extraction of nonionic and cationic surfactants produces synergistic effect in removal both (226)Ra and (228)Ra, where the removals reached 84% and 80% for (226)Ra and (228)Ra, respectively, were obtained using surfactants admixture.
More Related Videos
Related Concept Videos
Microbial Bioremediation of Uranium
Factors Affecting Solubility
Coagulation

