Related Experiment Video
Updated: Apr 19, 2026

Fabrication and Characterization of High-Q Silicon Nitride Membrane Resonators
Published on: August 8, 2025
Evidence of Surface Loss as Ubiquitous Limiting Damping Mechanism in SiN Micro- and Nanomechanical Resonators
1Advanced NEMS Group, École Polytechnique Fédérale de Lausanne (EPFL), CH-1015 Lausanne, Switzerland.
Abstract:
Silicon nitride (SiN) micro- and nanomechanical resonators have attracted a lot of attention in various research fields due to their exceptionally high quality factors (Qs). Despite their popularity, the origin of the limiting loss mechanisms in these structures has remained controversial. In this Letter we propose an analytical model combining acoustic radiation loss with intrinsic loss. The model accurately predicts the resulting mode-dependent Qs of low-stress silicon-rich and high-stress stoichiometric SiN membranes. The large acoustic mismatch of the low-stress membrane to the substrate seems to minimize radiation loss and Qs of higher modes (n∧m≥3) are limited by intrinsic losses. The study of these intrinsic losses in low-stress membranes reveals a linear dependence with the membrane thickness. This finding was confirmed by comparing the intrinsic dissipation of arbitrary (membranes, strings, and cantilevers) SiN resonators extracted from literature, suggesting surface loss as ubiquitous damping mechanism in thin SiN resonators with Q_{surf}=βh and β=6×10^{10}±4×10^{10} m^{-1}. Based on the intrinsic loss the maximal achievable Qs and Qf products for SiN membranes and strings are outlined.
Related Concept Videos
Concept of Resonance and its Characteristics
Damped Oscillations
Although friction and other non-conservative...
Types of Damping
Design Example: Underdamped Parallel RLC Circuit
Starting with a fixed...
Magnetic Damping
If, however, the bob is a slotted metal plate, the magnet produces a much smaller effect. When a slotted metal plate enters the field, an emf is induced by the change in flux; however, it is less effective because the slots limit the...

