Related Experiment Video
Updated: Apr 18, 2026

Design and Use of a Full Flow Sampling System FFS for the Quantification of Methane Emissions
Published on: June 12, 2016
A methodology for the determination of fugitive dust emissions from landfill sites
Eleftheria Chalvatzaki1, Thodoros Glytsos, Mihalis Lazaridis
1a Department of Environmental Engineering , Technical University of Crete , Chania , Greece.
Abstract:
This study focuses on the development of a methodology for the determination of the contribution of fugitive dust emissions from landfill sites to ambient PM10 concentrations and the subsequent exposure to working personnel. Fugitive dust emissions in landfills mainly originate from resuspension due to truck traffic on paved and unpaved roads and from wind-blown dust from landfill cover soil. The results revealed that exposure to PM10, originating from fugitive dust emissions in the landfill site, was exceeding the health protection standards (50 μg m(-3)). The higher average daily PM10 concentration (average value) for weekdays was equal to 275 μg m(-3) and was computed for the areas nearby the unpaved road located inside the landfill facilities that lead to the landfill cell. The percentage contributions of road and wind-blown dust to the PM10 concentrations on weekdays were equal to 76 and 1%, respectively. The influence of the background concentration is estimated close to 23%.
More Related Videos
06:52Lab-Scale Model to Evaluate Odor and Gas Concentrations Emitted by Deep Bedded Pack Manure
Published on: July 19, 2018
10:29Calibrated Passive Sampling - Multi-plot Field Measurements of NH3 Emissions with a Combination of Dynamic Tube Method and Passive Samplers
Published on: March 21, 2016