Performance of nitrate-dependent anaerobic ferrous oxidizing (NAFO) process: a novel prospective technology for
Meng Zhang1, Ping Zheng1, Wei Li1
1Department of Environmental Engineering, Zhejiang University, Hangzhou 310058, China.
Abstract:
Nitrate-dependent anaerobic ferrous oxidizing (NAFO) is a valuable biological process, which utilizes ferrous iron to convert nitrate into nitrogen gas, removing nitrogen from wastewater. In this work, the performance of NAFO process was investigated as a nitrate removal technology. The results showed that NAFO system was feasible for autotrophic denitrification. The volumetric loading rate (VLR) and volumetric removal rate (VRR) under steady state were 0.159±0.01 kg-N/(m(3) d) and 0.073±0.01 kg-N/(m(3) d), respectively. In NAFO system, the effluent pH was suggested as an indicator which demonstrated a good correlation with nitrogen removal. The nitrate concentration was preferred to be less than 130 mg-N/L. Organic matters had little influence on NAFO performance. Abundant iron compounds were revealed to accumulate in NAFO sludge with peak value of 51.73% (wt), and they could be recycled for phosphorus removal, with capacity of 16.57 mg-P/g VS and removal rate of 94.77±2.97%, respectively.
Related Concept Videos
Metabolism of Chemolithotrophs
Inorganic Nitrogen Assimilation
Microbial Nutrition
Overview of Nitrogen Metabolism
The largest pool of nitrogen available in the terrestrial ecosystem is gaseous nitrogen (N2) from the air, but this...
Anoxygenic Photosynthesis
2° Amines to N-Nitrosamines: Reaction with NaNO2


