Measuring solid percentage of oil sands mature fine tailings using the dual probe heat pulse method

The reclamation of mature fine tailings (MFT) is a critical challenge for the oil sands industry in western Canada, and a nonradioactive, automated, and inexpensive method to monitor the MFT solidification is needed. The objective of this paper is to evaluate the feasibility of a dual-probe heat pulse (DPHP) method to measure MFT solid percentage. Dual-probe heat pulse measurements were performed on three MFT samples, each at various solid percentages. A linear relationship ( = 0.9495 + 0.0558) was established between the DPHP-measured solid percentage () and that of oven-dry method (). Six additional MFT samples were collected and measured to validate the DPHP method. The specific heats of the six MFT solids were measured independently using a modulated differential scanning calorimetry method, and the sensitivity of DPHP-measured MFT solid percentage to the specific heat of MFT solids was evaluated. The result shows that the DPHP method can be used to accurately measure MFT solid percentages, and the accuracy can be further improved if the specific heat of the MFT solids is measured independently.