Kinetics of silver nanoparticle deposition at PAH monolayers: reference QCM results

The deposition kinetics of silver nanoparticles on Au/SiO2 /PAH substrate was studied under in situ conditions using the QCM method and the ex situ SEM imaging. Because of low dissipation, the Sauerbrey equation was used for calculating the mass per unit area (coverage). Measurements were done for various bulk suspension concentrations, flow rates, and ionic strengths. It was shown that particle deposition for the low coverage regime is governed by the bulk mass transfer step that results in a linear increase of the coverage with the time. A comparison of QCM and SEM results showed that the hydration of the silver monolayers was negligible. This allowed one to derive a universal kinetic equation that describes the mass transfer rates in the cell as a function of the bulk concentration, flow rate, and diffusion coefficient. Measurements were also performed for longer times and for various ionic strengths where the deposition kinetics and the maximum coverage of particles were determined. The experimental data confirmed a significant increase in the maximum coverage with ionic strength. This was interpreted as due to the decreasing range of the electrostatic interactions among deposited particles. These results were adequately interpreted in terms of the extended random sequential adsorption (eRSA) model. Additionally, it was shown that the QCM data matched the ex situ SEM results, indicating that the monolayer hydration was also negligible for higher coverage range. These results derived for the model silver nanoparticle system can be exploited as reference data for the interpretation of protein adsorption kinetics where the dry mass is needed in order to assess the extent of hydration.