Related Experiment Video
Updated: Apr 17, 2026
Quasistatic Mechanical Testing for Computer-Aided Design and Manufacturing Occlusal Veneers Cemented to Milled Dentin Analog Material
Published on: December 20, 2024
Biomechanical strength of glass ionomer cement in incudostapedial rebridging
E A Server1, Z Alkan1, O Yigit1
1Department of Otolaryngology Head and Neck Surgery,Istanbul Training and Research Hospital,Istanbul,Turkey.
Objective:
To study the biomechanical properties of glass ionomer cement used for incudostapedial rebridging.
Methods:
Two groups were established based on the size of the gap between the incus and stapes (1.0 mm in group 1 and 2.0 mm in group 2). Glass ionomer cement was applied to the gaps, and compression tests were performed. Maximum force was measured at the fracture point, and was divided by the cross-sectional area to obtain the maximum compressive strength.
Results:
No significant difference was found in the maximum force for the two groups (p = 0.312). The glass ionomer cement diameter was significantly higher in group 2 than in group 1 (p = 0.006). The maximum compressive strength was significantly higher in group 1 than in group 2 (p = 0.042).
Conclusion:
The fragility of bone cement used in this study was 25.5 per cent higher for a 2 mm gap than for a 1 mm gap. We speculate that the use of bone cement may be safer for the repair of smaller incudostapedial defects.
Related Concept Videos
01:12Bonding and Strength of Aggregate
01:20Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
01:27Fractures: Bone Repair
Minor fractures with no bone displacement are treated by immobilizing the fractured bone using a cast or splint. However, in the case of fractures with displaced bones, the broken bones are repositioned before immobilization to ensure successful healing without deformation and loss of function. The realignment of fractured bone ends is performed through a process called reduction. If the...