Related Experiment Video
Updated: Apr 17, 2026

Developing High Performance GaP/Si Heterojunction Solar Cells
Published on: November 16, 2018
Characteristics of a silicon nanowires/PEDOT:PSS heterojunction and its effect on the solar cell performance
Zhimin Liang1, Mingze Su1, Hao Wang
1†Siyuan Laboratory, Department of Physics, Jinan University, Guangzhou, Guangdong 510632, P. R. China.
Abstract:
The interfacial energy-level alignment of a silicon nanowires (SiNWs)/PEDOT:PSS heterojunction is investigated using Kelvin probe force microscopy. The potential difference and electrical distribution in the junction are systematically revealed. When the PEDOT:PSS layer is covered at the bottom of the SiNW array, an abrupt junction is formed at the interface whose characteristics are mainly determined by the uniformly doped Si bulk. When the PEDOT:PSS layer is covered on the top, a hyperabrupt junction localized at the top of the SiNWs forms, and this characteristic depends on the surface properties of the SiNWs. Because the calculation shows that the absorption of light from the SiNWs and the Si bulk are equally important, the bottom-coverage structure leads to better position matching between the depletion and absorption area and therefore shows better photovoltaic performance. The dependence of JSC and VOC on the junction characteristic is discussed.
More Related Videos
Related Concept Videos
P-N junction
Semiconductors
Metals such as copper (Cu), zinc (Zn), or lead (Pb) have low resistivity and feature conduction bands that are either not fully occupied or overlap with the valence band, making a bandgap non-existent. This allows electrons in the highest energy levels of the valence band to easily transition to the conduction band upon gaining...
Types of Semiconductors
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...

