Waste Separation Press (WSP): a mechanical pretreatment option for organic waste from source separation

An efficient biological treatment of source separated organic waste from household kitchens and gardens (biowaste) requires an adequate upfront mechanical preparation which possibly includes a hand sorting for the separation of contaminants. In this work untreated biowaste from households and gardens and the screen overflow >60mm of the same waste were mechanically treated by a Waste Separation Press (WSP). The WSP separates the waste into a wet fraction for biological treatment and a fraction of dry contaminants for incineration. The results show that it is possible to replace a hand sorting of contaminants, the milling and a screening of organic waste before the biological treatment by using the WSP. A special focus was put on the contaminants separation. The separation of plastic film from the untreated biowaste was 67% and the separation rate of glass was about 92%. About 90% of the organics were transferred to the fraction for further biological treatment. When treating the screen overflow >60mm with the WSP 86% of the plastic film and 88% of the glass were transferred to the contaminants fraction. 32% of the organic was transferred to the contaminants fraction and thereby lost for a further biological treatment. Additionally it was calculated that national standards for glass contaminants in compost can be met when using the WSP to mechanically treat the total biowaste. The loss of biogas by transferring biodegradable organics to the contaminants fraction was about 11% when preparing the untreated biowaste with the WSP.