[HPLC fingerprint of liuwei dihuang soft capsule]

In order to establish HPLC fingerprint of Liuwei Dihuang soft capsule, and to provide certain reference for an quality control of it, the HPLC method was performed on an Agilent C18 (4.6 mm x 250 mm, 5 μm) column with acetonitrile-0.02% trifluoroacetic acid as mobile phase, gradient elution volume flow of 1.0 mL x min(-1), column temperature was 30 degrees C, detection wavelength: 0-60 min, 238 nm, 60-70 min, 210 nm. The software for chromatographic fingerprint was applied to analysis different batches of Liuwei Dihuang soft capsule samples. Sixteen mutual peaks were selected as the fingerprint peaks in 12 samples with loganin as the reference peak, and all of the detected peaks were separated effectively. Cluster analysis (HCA) and similarity analysis (SA) were done based on data of 12 samples clustering analysis of 12 batches of samples were divided into 2 categories. Including 7 for the first class, the rest was second, similarities calculated by SA were all above 0.92, indicating a good similarity between the reference and twelve batches of samples, also, the analysis results of HCA and SA basically the same. This method is simple with good precision, repeatability and stability, and provides the basis for Liuwei Dihuang soft capsule quality control.