Related Experiment Video
Updated: Apr 13, 2026

Assembly and Quantification of Co-Cultures Combining Heterotrophic Yeast with Phototrophic Sugar-Secreting Cyanobacteria
Published on: December 27, 2024
Effects of CO₂ Concentration and pH on Mixotrophic Growth of Nannochloropsis oculata
Shaikh A Razzak1, Muhammad Ilyas, Saad Aldin M Ali
1Department of Chemical Engineering, King Fahd University of Petroleum & Minerals, Dhahran, 31261, Saudi Arabia, srazzak@kfupm.edu.sa.
Abstract:
This communication reports an experimental investigation of integrated CO2 bio-conversion, wastewater treatment, and biomass production by microalgae cultivation. In this regard, the effects of CO2 concentrations on mixotrophic growth kinetics of a microalgae strain (Nannochloropsis oculata) are conducted in a semi-batch photobioreactor. The concentration of CO2 in the feed stream is varied from 4 to 12 mol% by adjusting CO2-to-air ratio. The variation of pH of the synthetic wastewater culture media and nutrient uptake by the microalgae are also monitored. The experimental evaluation shows that 8 % CO2 gives the highest growth rate of N. oculata with a productivity of 0.088 g L(-1) day(-1). Under the studied conditions, the pH value of the culture media between 5.5 and 6.5 is favorable for the growth of N. oculata in mixotrophic condition. Among the nutrients available in the culture media, percentage of ammonia removal is found to be the highest (98.9 %) as compared that of other compounds such as nitrate (88.2 %) and phosphate (18.9 %). The thermochemical characteristics of the cultivated microalgae are assessed by thermogravimetric analysis in presence of air. The produced microalgae is thermally stable up to 200 °C. Following that, the microalgae biomass is sharply decomposed within 600 °C.
More Related Videos
Related Concept Videos
Factors Influencing Microbial Growth: pH
Factors Influencing Microbial Growth: Osmolarity
Designing Growth Media for Bioreactors
Oxygen Requirements and Growth Patterns
Bioreactor Controls-II
Microbial Growth Measurement: Indirect Methods

