Avalanche dynamics of granular materials under the slumping regime in a rotating drum as revealed by speckle
1School of Optical-Electrical and Computer Engineering, Shanghai Key Lab of Modern Optical System, and Engineering Research Center of Optical Instrument and System, Ministry of Education, University of Shanghai for Science and Technology, Shanghai 200093, China.
Abstract:
We used speckle visibility spectroscopy to measure the time-resolved dynamcis of avalanching down the inclined surface of a granular material in a half-full rotating drum operating in the slumping regime. The distribution of the avalanche period, t(d), rest time between them, t(r), and peak particle velocity fluctuation, δv(p)(2), are all normally distributed. While the distributions of the two times at the top and bottom of the free surface are very similar, the particle velocity fluctuation is greater at the bottom of the free surface than at the top. The rest time is observed to be inversely related to the drum speed. Combining this with the relation of t(r) and the difference of the upper and lower angle of repose for the granular material, Δθ, we find that the latter decreases linearly with increasing rotational speed. We also observe that t(d) increases in a linear fashion with the drum speed. Using the relation of t(r) and the distance that particles have to move during an avalanche, we further find that a new scaling relation of the mean number of avalanches required to traverse the free surface with drum speed. We find that the slumping frequency increases with the rotating speed before becoming constant in the slumping-to-rolling transition region. Finally, we find that the average peak of the fluctuation speed of the avalanche, δv(p)(2), increases linearly with the drum speed.
More Related Videos
11:03An Analog Macroscopic Technique for Studying Molecular Hydrodynamic Processes in Dense Gases and Liquids
Published on: December 4, 2017
11:51Visually Based Characterization of the Incipient Particle Motion in Regular Substrates: From Laminar to Turbulent Conditions
Published on: February 22, 2018
Related Concept Videos
Slump Test
Concrete is poured into the mold in three layers to conduct the test. Each layer is compacted 25 times with a steel tamping rod, which has a five-eighths-inch diameter and a rounded end, to ensure even distribution and eliminate...
Rolling With Slipping
An object's rolling motion is characterized by its rotation around its axis, while linear motion refers to the object's translational motion along a surface. Frictional forces can...
Rolling Without Slipping
Unsoundness of Aggregate due to Volume Change
Equation of Motion: General Plane motion - Problem Solving
The friction between the roller and the ground is characterized by two coefficients. The static friction coefficient is 0.15, while the kinetic friction coefficient is 0.1. These values are crucial in understanding the interaction between...
Mixing Concrete
