Related Experiment Video
Updated: Apr 11, 2026

The Evolution of Silica Nanoparticle-polyester Coatings on Surfaces Exposed to Sunlight
Published on: October 11, 2016
Influence of ceria nanoparticles on chemical structure and properties of segmented polyesters
M El Fray1, D Strzalkowska1, C Mandoli2
1West Pomeranian University of Technology, Szczecin, Polymer Institute, Division of Biomaterials and Microbiological Technologies, Al. Piastów 45, 70-311 Szczecin, Poland.
Abstract:
In this work, we present new nanocomposite materials derived from segmented copolyesters, comprising ethylene terephthalate (PET) segments and dimerized linoleic acid (DLA), and nanometric cerium oxide particles (CeO2). Nanoparticles were incorporated in situ during polycondensation in various concentrations, from 0.1 up to 0.6 wt.%. It was found that preparation of nanocomposites in situ, during polycondensation, had no significant influence on changes in segmental composition as determined from (1)H and (13)C, as well as 2D NMR. Thermal analysis and calculated degree of crystallinity showed that increasing concentration of ceria nanoparticles lead to an increase in mass content of PET crystallites in hard segments. The XRD investigations also showed an increased intensity of characteristic signals with increasing ceria concentration. Simultaneously, the incorporation of CeO2 led to an increase in tensile strength and elongation at break, indicating a reinforcing and plasticizing effect of ceria nanoparticles. However, the modulus at 10% strain decreased with increasing amount of nanoparticles. The in vitro culture of human cardiac progenitor cells (hCPCs) on the new materials indicated a homogenous cell displacement across the samples after 5 days with no signs of cytotoxicity, indicating good biocompatibility in vitro of CeO2-based nanocomposites and a potential for biomedical applications.
Related Concept Videos
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the polymer...
Polymer Classification: Architecture
Polymer Classification: Stereospecificity
Molecular Weight of Step-Growth Polymers
As the step-growth polymerization involves step-wise condensation of monomers, the molecular weight also builds up eventually. Consequently, high molecular weight polymers are obtained at the late stages of the polymerization, where 99% of monomers have been consumed.
The extent of the...
Ziegler–Natta Chain-Growth Polymerization: Overview
Cationic Chain-Growth Polymerization: Mechanism

