Related Experiment Video
Updated: Apr 10, 2026

Electrochemically and Bioelectrochemically Induced Ammonium Recovery
Published on: January 22, 2015
Optimized matching modes of bioelectrochemical module and anaerobic sludge in the integrated system for azo dye
Fanying Kong1, Aijie Wang2, Hong-Yu Ren1
1State Key Laboratory of Urban Water Resource and Environment, School of Municipal and Environmental Engineering, Harbin Institute of Technology, Harbin 150090, China.
Abstract:
In this work, three matching modes (relative positions, catholyte flow sequences, and flow regimes) of bioelectrochemical module and anaerobic sludge were evaluated and optimized for azo dye treatment in the integrated system with embedding modular bioelectrochemical system into anaerobic sludge reactor. Results showed that it was favorable to operate this integrated system under the condition of 1/4 cathode soaking into sludge with spiral distributor in down-flow direction. Current, electrochemical impedance spectroscopy and pH clearly demonstrated the important role of 1/4 soaking in electron/proton transfer. The down-flow direction flowed through electrode zone and then sludge zone could benefit to the efficient use of cathode and improve AO7 treatment. Furthermore, the positive effect of spiral catholyte distributor might be due to its promoting role in mixing and creating a spiral flow channel around the cathode electrode-microbes-solution interface. These results exhibited great potential for matching modular bioelectrochemical system with anaerobic treatment process.
More Related Videos
11:58Waste Water Derived Electroactive Microbial Biofilms: Growth, Maintenance, and Basic Characterization
Published on: December 29, 2013
15:19Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor
Published on: October 15, 2015
Related Concept Videos
Bioreactor Design and Operational System
Aryldiazonium Salts to Azo Dyes: Diazo Coupling
Bioremediation