Related Experiment Video

Updated: Apr 9, 2026

Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer
08:29

Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer

Published on: January 10, 2017

9.5K

A new multi-functional conjugated polymer for use in high-performance bulk heterojunction solar cells

Yu Jin Kim1, Myeong-Jong Kim2, Tae Kyu An1

  • 1POSTECH Organic Electronics Laboratory, Department of Chemical Engineering, Pohang University of Science and Technology, Pohang, 790-784, Korea. cep@postech.ac.kr.

Chemical Communications (Cambridge, England)
|June 23, 2015
PubMed

More Related Videos

Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization07:32

Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization

Published on: January 29, 2017

11.7K
Developing High Performance GaP/Si Heterojunction Solar Cells10:31

Developing High Performance GaP/Si Heterojunction Solar Cells

Published on: November 16, 2018

8.0K

Related Concept Videos

P-N junction01:11

P-N junction

A p-n junction is formed when p-type and n-type semiconductor materials are joined together. At the interface of the p-n junction, holes from the p-side and electrons from the n-side begin to diffuse into the opposite sides due to the concentration gradient. This diffusion of carriers leads to a region around the junction where there are no free charge carriers, known as the depletion region. The charge density within the depletion region for the n-side and p-side can be described by the...
1.7K