Related Experiment Video
Updated: Apr 7, 2026

Characterization of Recombination Effects in a Liquid Ionization Chamber Used for the Dosimetry of a Radiosurgical Accelerator
Published on: May 9, 2014
Dose response, radiation sensitivity and signal fading of p-channel MOSFETs (RADFETs) irradiated up to 50 Gy with
1University of Niš, Faculty of Electronic Engineering, Aleksandra Medvedeva 14, 18000 Niš, Serbia.
Abstract:
This paper reports response of p-channel MOSFETs (RADFETs) to (60)Co gamma radiation in the 10-50 Gy dose range and signal fading (room temperature annealing) for 100 days after irradiation. RADFETs with three different thicknesses of the gate oxide layer were used. Irradiations were performed at gate biases ranging from 0 to 5 V. Threshold voltage shift was monitored during the irradiations and the subsequent fading. The dependence of the threshold voltage shift on the radiation dose is linear for the RADFETs with 100 nm- and 400 nm-thick gate oxide layers irradiated under the gate biases ranging from 1.25 to 5 V. Also, an exponential dependence of the radiation sensitivity on the gate bias during irradiation was found. The signal fades at room temperature without a gate bias. The results demonstrate that these RADFETs are suitable as sensors of gamma radiation. The threshold voltage shift of the RADFETs with 400 nm- and 1 μm-thick gate oxide layers decreases significantly during the first day after irradiation, which, unfortunately, makes these devices incapable of holding dosimetric information for long periods of time.
More Related Videos
06:21Diffuse Optical Spectroscopy for the Quantitative Assessment of Acute Ionizing Radiation Induced Skin Toxicity Using a Mouse Model
Published on: May 27, 2016
11:40A Co-culture Method to Investigate the Crosstalk Between X-ray Irradiated Caco-2 Cells and PBMC
Published on: January 30, 2018
Related Concept Videos
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
MOSFET Amplifiers