Optimization of high solids fed-batch saccharification of sugarcane bagasse based on system viscosity changes
Yunyun Liu1, Jingliang Xu2, Yu Zhang2
1Institute of New Energy and New Materials, South China Agriculture University, Guangzhou 510642, PR China; Guangzhou Institute of Energy Conversion, Key Laboratory of Renewable Energy, Chinese Academy of Sciences, Guangzhou 510640, PR China.
Abstract:
Viscosity trends in alkali-pretreated sugarcane bagasse (SCB) slurries undergoing high solids fed-batch enzymatic hydrolysis were measured for a range of solids loading from 15% to 36%. Solids liquefaction times were related to system viscosity changes. The viscosity decreased quickly for low solids loading, and increased with increasing solids content. Fed-batch hydrolysis was initiated with 15% solids loading, and an additional 8%, 7% and 6% were successively added after the system viscosity decreased to stable values to achieve a final solids content of 36%. Two enzyme-adding modes with 8.5FPU/g solid were investigated. The batch mode with all enzyme being added at the beginning of the reaction produced the highest yields, with approximately 231.7g/L total sugars and 134.9g/L glucose being obtained after 96h with nearly 60% of the final glucan conversion rate. This finding indicates that under the right conditions, the fed-batch strategy might be a plausible way to produce high sugars under high solids.
