A fast response & recovery H2S gas sensor based on α-Fe2O3 nanoparticles with ppb level detection limit
Zhijie Li1, Yanwu Huang1, Shouchao Zhang1
1School of Physical Electronics, University of Electronic Science and Technology of China, Chengdu 610054, PR China.
Abstract:
H2S gas sensor based on α-Fe2O3 nanoparticles was fabricated by post-thermal annealing of Fe3O4 precursor which was synthesized using a facile hydrothermal route. The characteristic techniques including X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were adopted to characterize the chemical composition and microstructure of the obtained samples. Gas-sensing performance of the sensor was investigated at different operation temperatures from 100°C to 400°C. Results showed that the sensor exhibited the best sensitivity, reproducibility and long-term stability for detecting H2S gas at an operating temperature of 300°C. The detection limit towards H2S gas was 0.05 ppm, and the response time and recovery time was 30s and 5s, respectively. In addition, sensing mechanism of the sensor towards H2S was discussed.
Related Concept Videos
01:19Gas Chromatography: Types of Detectors-II
01:13Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...