Related Experiment Video
Updated: Apr 6, 2026

Experimental Investigation of Secondary Flow Structures Downstream of a Model Type IV Stent Failure in a 180° Curved Artery Test Section
Published on: July 19, 2016
Impact of bifurcation dual stenting on endothelial shear stress
Henry Y Chen1, Bon-Kwon Koo2, Ghassan S Kassab3
1California Medical Innovations Institute, Inc., San Diego, California; and.
Abstract:
Despite advances in percutaneous coronary interventions and the introduction of drug eluding stents, in-stent restenosis and stent thrombosis remain a clinically significant problem for bifurcations. The aim of this study is to determine the effect of dual bifurcation stenting on hemodynamic parameters known to influence restenosis and thrombosis. We hypothesized that double stenting, especially with a longer side branch (SB) stent, likely has a negative effect on wall shear stress (WSS), WSS gradient (WSSG), and oscillatory shear index (OSI). To test this hypothesis, we developed computational models of dual stents at bifurcations and non-Newtonian blood simulations. The models were then interfaced, meshed, and solved in a validated finite-element package. Longer and shorter stents at the SB and provisional stenting were compared. It was found that stents placed in the SB at a bifurcation lowered WSS, but elevated WSSG and OSI. Dual stenting with longer SB stent had the most adverse impact on SB endothelial WSS, WSSG, and OSI, with low WSS region up to 50% more than the case with shorter SB stent. The simulations also demonstrated flow disturbances resulting from SB stent struts protruding into the main flow field near the carina, which may have implications on stent thrombosis. The simulations predict a negative hemodynamic role for SB stenting, which is exaggerated with a longer stent, consistent with clinical trial findings that dual-stenting is comparable or inferior to provisional stenting.
More Related Videos
13:07Optical Coherence Tomography Based Biomechanical Fluid-Structure Interaction Analysis of Coronary Atherosclerosis Progression
Published on: January 15, 2022
09:10Human Saphenous Vein Endothelial Cell Isolation and Exposure to Controlled Levels of Shear Stress and Stretch
Published on: April 21, 2023
Related Concept Videos
Shearing Stress
The average shearing stress can be calculated by dividing the shear by the area of the cross-section.
Stresses under Combined Loadings
The process begins by slicing the tube at critical points and analyzing the internal forces and stress components at these sections, focusing on the centroid. Normal stresses, generated by axial forces and bending moments, are either compressive or tensile and vary across the section from...
Shearing Stresses in a Beam: Problem Solving