The nature and effects of composite finishing pastes

Specimens of composite resins, contoured and finished with a series of microfine diamonds, were finished with a selection of commercially available composite finishing pastes. The resulting surfaces were examined using scanning electron microscopy (SEM) and surface profilometry. Samples of the pastes were investigated using SEM and energy dispersive X-ray spectroscopy. All the paste systems employed an abrasive of similar composition and particle size. The selection of finishing pastes produced marked improvements of the surfaces of the composite resins. The small differences measured between the performances of the four finishing pastes included in this study could not be corroborated by SEM evaluation. Therefore, within the limitations of this study, there was little evidence to suggest that any one paste system was superior to the others. The results of this study indicate that commercially available composite resin finishing pastes of the type investigated may be used to improve the surface of all types of contemporary composite resins and may be of particular value in finishing the concave surfaces of restorations of composite resins following contouring and finishing with microfine diamond burs.