Development of beryllium-based neutron target system with three-layer structure for accelerator-based neutron source
Hiroaki Kumada1, Toshikazu Kurihara2, Masakazu Yoshioka2
1Faculty of Medicine, University of Tsukuba, Tsukuba, Ibaraki 305-8575, Japan.
Abstract:
The iBNCT project team with University of Tsukuba is developing an accelerator-based neutron source. Regarding neutron target material, our project has applied beryllium. To deal with large heat load and blistering of the target system, we developed a three-layer structure for the target system that includes a blistering mitigation material between the beryllium used as the neutron generator and the copper heat sink. The three materials were bonded through diffusion bonding using a hot isostatic pressing method. Based on several verifications, our project chose palladium as the intermediate layer. A prototype of the neutron target system was produced. We will verify that sufficient neutrons for BNCT treatment are generated by the device in the near future.
