Related Experiment Video

Updated: Apr 5, 2026

Parametric Optimization Design Method for Friction Plates of Hydro-Viscous Clutches
10:58

Parametric Optimization Design Method for Friction Plates of Hydro-Viscous Clutches

Published on: July 22, 2025

770

Study of Nonlinear MHD Tribological Squeeze Film at Generalized Magnetic Reynolds Numbers Using DTM

Mohammad Mehdi Rashidi1, Navid Freidoonimehr2, Ebrahim Momoniat3

  • 1Mechanical Engineering Department, Engineering Faculty of Bu-Ali Sina University, Hamedan, Iran; University of Michigan-Shanghai Jiao Tong University Joint Institute, Shanghai Jiao Tong University, Shanghai, Peoples Republic of China.

Plos One
|August 13, 2015
PubMed

More Related Videos

A Modeling and Simulation Method for Preliminary Design of an Electro-Variable Displacement Pump09:04

A Modeling and Simulation Method for Preliminary Design of an Electro-Variable Displacement Pump

Published on: June 1, 2022

3.7K
Visually Based Characterization of the Incipient Particle Motion in Regular Substrates: From Laminar to Turbulent Conditions11:51

Visually Based Characterization of the Incipient Particle Motion in Regular Substrates: From Laminar to Turbulent Conditions

Published on: February 22, 2018

9.2K

Related Concept Videos

Magnetostatic Boundary Conditions01:28

Magnetostatic Boundary Conditions

An electric field suffers a discontinuity at a surface charge. Similarly, a magnetic field is discontinuous at a surface current. The perpendicular component of a magnetic field is continuous across the interface of two magnetic mediums. In contrast, its parallel component, perpendicular to the current, is discontinuous by the amount equal to the product of the vacuum permeability and the surface current. Like the scalar potential in electrostatics, the vector potential is also continuous...
1.8K
Major Losses in Pipes01:28

Major Losses in Pipes

When a fluid flows through a pipe, it experiences energy losses due to frictional resistance along the pipe walls, known as major losses. These energy losses result in a pressure drop, which varies based on the flow conditions — whether laminar or turbulent — and the specific physical properties of the fluid and pipe.
Fluid flow can be classified as laminar or turbulent, primarily based on the Reynolds number. This dimensionless number reflects the relative influence of inertial to viscous...
2.6K
Poiseuille's Law and Reynolds Number01:10

Poiseuille's Law and Reynolds Number

Any fluid in a horizontal tube can flow due to pressure differences—fluid flows from high to low pressure. The flow rate (Q) is the ratio of pressure difference and resistance through a horizontal tube. The greater the pressure difference, the higher the flow rate. The flow resistance is expressed as:
10.1K
Steady, Laminar Flow Between Parallel Plates01:17

Steady, Laminar Flow Between Parallel Plates

Understanding steady, laminar flow between parallel plates is essential for analyzing and designing flow in narrow rectangular channels, commonly found in various water conveyance and drainage systems. The Navier-Stokes equations govern fluid motion and are generally challenging to solve due to their nonlinearity. However, simplifications are possible in certain cases, like the steady laminar flow between parallel plates. For this scenario, we assume steady, incompressible, laminar flow.
1.0K
Dimensionless Groups in Fluid Mechanics01:15

Dimensionless Groups in Fluid Mechanics

Dimensionless groups in fluid mechanics provide simplified ratios that help analyze fluid behavior without relying on specific units. The Reynolds number (Re), which represents the ratio of inertial to viscous forces, distinguishes between laminar and turbulent flows, making it essential in the design of pipelines and aerodynamic surfaces. The Froude number (Fr), the ratio of inertial to gravitational forces, is particularly useful in predicting wave formation and hydraulic jumps in...
927
Reynolds Transport Theorem01:24

Reynolds Transport Theorem

The Reynolds transport theorem provides a framework to relate the time rate of change of an extensive property within a system to that in a control volume, which is crucial for analyzing fluid dynamics. Extensive properties, such as mass, velocity, acceleration, temperature, and momentum, can be expressed in terms of the mass of a fluid portion. These properties are called extensive because they depend on the system's size, while intensive properties are their corresponding values per unit...
2.1K