Related Experiment Video
Updated: Apr 5, 2026

Fabrication of Fully Solution Processed Inorganic Nanocrystal Photovoltaic Devices
Published on: July 8, 2016
Direct Electronic Property Imaging of a Nanocrystal-Based Photovoltaic Device by Electron Beam-Induced Current via
Amy Ng1, Jonathan D Poplawsky2,3, Chen Li1,2
1†Department of Chemistry, Vanderbilt Institute of Nanoscale Science and Engineering, Vanderbilt University, Nashville, Tennessee 37235, United States.
Abstract:
Scanning electron microscopy (SEM) electron beam-induced current (EBIC) studies were performed on the cross-section of a nanocrystal-based hybrid bulk heterojunction photovoltaic device. Using these techniques, the short circuit carrier collection efficiencies are mapped with a better than 100 nm resolution. Electronically deficient and proficient regions within the photoactive layer are determined. The results show that only a fraction of the CdSe nanorod:P3HT layer (P3HT = poly-3(hexylthiophene)) at the Al cathode interface shows primary collection of charged carriers, in which the photoactivity decreases exponentially away from the interface. The recombination losses of the photoactive layer away from this interface prove that the limiting factor of the device is the inability for electrons to percolate between nanoparticles; to alleviate this problem, an interparticle network that conducts the electrons from one nanorod to the next must be established. Furthermore, the EBIC technique applied to the nanocrystalline device used in this study is the first measurement of its kind and can be applied toward other similar architectures.
Related Concept Videos
Scanning Electron Microscopy
Fundamental Principles
Accelerated...
Overview of Electron Microscopy

