Related Experiment Video
Updated: Apr 5, 2026

Resource Recycling of Red Soil to Synthesize Fe2O3/FAU-type Zeolite Composite Material for Heavy Metal Removal
Published on: June 2, 2022
Phosphate removal from water by a novel zeolite/lanthanum hydroxide hybrid material prepared from coal fly ash
1a School of Environmental Science and Engineering, Shanghai Jiao Tong University , Shanghai , China.
Abstract:
This study was undertaken to investigate the effectiveness of the hybrid adsorbent, which was synthesized from coal fly ash and was composed of lanthanum hydroxide and zeolite (La-ZFA), for phosphate removal from water. Long-term repeated adsorption tests for 30 days showed that the maximum removal capacity of the material reached 66.09 mg P/g. The fractionation of adsorbed phosphorus indicated that phosphate immobilized by La-ZFA was quite irreversible and was dominated by HCl-P fraction. It was suggested that the immobilization of phosphate was mainly attributed to lanthanum hydroxide and was slightly influenced by coexistence of other anions (Cl(-), NO3(-), SO4(2-), and HCO3(-)). At a La/P molar ratio between 1.5:1 and 2.0:1, a nearly complete removal (above 98%) of phosphate could be achieved. La-ZFA also exhibited great performance for removing phosphate from lake water (97.29%) as well as the effluent from wastewater treatment plant (97.86%), respectively. In addition, based on the results of the present study, it was believed that La-ZFA could be a potential material for phosphate removal in practical application.
More Related Videos
11:14Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
08:21Optimized Procedure for Determining the Adsorption of Phosphonates onto Granular Ferric Hydroxide using a Miniaturized Phosphorus Determination Method
Published on: May 18, 2018
Related Concept Videos
Pozzolans
Fly ash is...
Factors Affecting Solubility
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...