Related Experiment Video
Updated: Apr 4, 2026

Composition and Distribution Analysis of Bioaerosols Under Different Environmental Conditions
Published on: January 7, 2019
[Comparison Test Between PM2.5 Continuous Monitoring System and Manual Sampling Analysis for PM2.5 in Ambient Air]
Abstract:
According to the U. S. EPA performance index and detection methods for comparison test of PM2.5 continuous monitoring system, in combination of the current related technical specifications in China, 4 types of typical imported and domestic PM2.5 continuous monitoring system with two different principles were tested and compared to the manual sampling measurement (gravimetric method) in spring, summer, autumn and winter. This research determined the quality control requirements ( parallelism of manual sampling measurement results ≤ 5 µg · m(-3) or 5%), the technical index (slope of linearity regression equation 1 ± 0.15; intercept 0 ± 10; correlation coefficient ≥ 0.95), and corresponding detection methods of reference method comparison test to PM2.5 continuous monitoring system, which meets the requirement of current environmental quality status and environmental monitoring and management in China. It also provided technical means and method of quality control for effective use and data quality of PM2.5 continuous monitoring system in China.
More Related Videos
09:33Visualizing Field Data Collection Procedures of Exposure and Biomarker Assessments for the Household Air Pollution Intervention Network Trial in India
Published on: December 23, 2022
07:14Automated, High-resolution Mobile Collection System for the Nitrogen Isotopic Analysis of NOx
Published on: December 20, 2016
Related Concept Videos
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
Gravimetry: Overview
In precipitation gravimetry, the analyte is converted into a precipitate and weighed. For example, the silver content in a sample can be estimated by precipitating and...