Low-Temperature Solution-Processed Kesterite Solar Cell Based on in Situ Deposition of Ultrathin Absorber Layer

The production of high-performance, solution-processed kesterite Cu2ZnSn(Sx,Se1-x)4 (CZTSSe) solar cells typically relies on high-temperature crystallization processes in chalcogen-containing atmosphere and often on the use of environmentally harmful solvents, which could hinder the widespread adoption of this technology. We report a method for processing selenium free Cu2ZnSnS4 (CZTS) solar cells based on a short annealing step at temperatures as low as 350 °C using a molecular based precursor, fully avoiding highly toxic solvents and high-temperature sulfurization. We show that a simple device structure consisting of ITO/CZTS/CdS/Al and comprising an extremely thin absorber layer (∼110 nm) achieves a current density of 8.6 mA/cm(2). Over the course of 400 days under ambient conditions encapsulated devices retain close to 100% of their original efficiency. Using impedance spectroscopy and photoinduced charge carrier extraction by linearly increasing voltage (photo-CELIV), we demonstrate that reduced charge carrier mobility is one limiting parameter of low-temperature CZTS photovoltaics. These results may inform less energy demanding strategies for the production of CZTS optoelectronic layers compatible with large-scale processing techniques.