Related Experiment Video
Updated: Apr 1, 2026
09:39
In-situ Tapering of Chalcogenide Fiber for Mid-infrared Supercontinuum Generation
Published on: May 27, 2013
12.8K
High-resolution chalcogenide fiber bundles for infrared imaging
Optics Letters
|October 1, 2015
Abstract:
An ordered chalcogenide fiber bundle with a high resolution for infrared imaging was fabricated using a stack-and-draw approach. The fiber bundle consisted of about 810,000 single fibers with an As2S3 glass core of 9 μm in diameter and a polyetherimide (PEI) polymer cladding of 10 μm in diameter. The As2S3/PEI fibers showed good transparency in the 1.5-6.5 μm spectral region. It presented a resolution of ∼45 lp/mm and a crosstalk of ∼2.5%. Fine thermal images of a hot soldering iron tip were delivered through the fiber bundle.
Related Concept Videos
01:09Infrared (IR) Spectroscopy: Overview
7.3K
When electromagnetic radiation passes through a material, atoms or molecules transition from a lower to a higher energy state by absorbing radiation corresponding to the energy difference between the two states. The absorption of infrared (IR) radiation causes transitions between vibrational energy levels in a molecule. Therefore, IR spectroscopy is a useful analytical tool for determining the molecular structure of molecules.
Different compounds display unique properties due to their...
Different compounds display unique properties due to their...
7.3K
01:25IR Spectrometers
3.4K
There are two main infrared (IR) spectrophotometers: dispersive IR spectrometers and Fourier transform infrared (FTIR) spectrometers. In a dispersive IR spectrometer, a beam of infrared radiation produced by a hot wire is divided into two parallel equal-intensity beams using mirrors. One beam passes through the sample, while another is a reference beam. The beams then move through the monochromator, which separates the radiations into a continuous spectrum of different frequencies. The...
3.4K