Differences in soluble COD and ammonium when applying inverted phase fermentation to primary, secondary and mixed

L Negral1, E Marañón1, L Castrillón1

  • 1Department of Chemical and Environmental Engineering, University Institute of Industrial Technology of Asturias, Campus of Gijón, University of Oviedo, 33203 Gijón, Spain

Related Concept Videos

Batch vs Continuous Culture01:14

Batch vs Continuous Culture

Fermentation is a foundational biotechnological process used to produce pharmaceuticals, biofuels, enzymes, and food additives. Among industrial strategies, batch and continuous fermentation are the two most widely applied. Although both rely on microbial conversion of substrates into desired products, they differ markedly in operation, productivity, and suitability for specific applications.Batch fermentation occurs in a closed system in which nutrient media and inoculum are added at the...
108
Metabolism of Chemolithotrophs01:15

Metabolism of Chemolithotrophs

Chemolithotrophs are microorganisms that obtain energy by oxidizing inorganic molecules such as hydrogen gas (H₂), ammonia (NH₃), reduced sulfur compounds (H₂S, S²⁻), and ferrous iron (Fe²⁺). Unlike heterotrophic organisms that rely on organic carbon, chemolithotrophs transfer electrons from these inorganic donors to the electron transport chain (ETC), generating a proton motive force (PMF) that drives ATP synthesis through oxidative phosphorylation.
1.2K
Bioreactor Controls-II01:18

Bioreactor Controls-II

In aerobic fermentations, oxygen is vital for microbial growth and metabolite production. Since air comprises only about 20% oxygen and the gas is poorly soluble in water—just 9 ppm at 20°C—supplying sufficient oxygen becomes a critical challenge, especially in high-demand processes like yeast growth or citric acid production. Even a fully saturated broth may offer only a few seconds of oxygen availability.To address this, sterile or scrubbed air is introduced into the...
54
Bioreactor Design and Operational System01:29

Bioreactor Design and Operational System

Bioreactors are engineered vessels designed to cultivate microorganisms under controlled conditions for industrial bioprocessing. They maintain sterility and allow precise regulation of pH, temperature, oxygen, and nutrient levels to optimize microbial growth and metabolite production. Bioreactors range from small laboratory units of 1 liter to industrial systems holding up to 500,000 liters, though only about 75% of their volume is actively used for fermentation. The remaining headspace...
72
Titration in Nonaqueous Solvents01:16

Titration in Nonaqueous Solvents

Most acid-base titrations are performed in an aqueous medium. In aqueous titrations, water competes with weaker acids or bases for proton donation or acceptance, leading to ambiguous endpoints in the titration curve. Water also affects the partial ionization of weak acids or bases. For example, water accepts a proton from acetic acid to form hydronium and acetate ions. The hydronium ion formed is a stronger acid than acetic acid, and the acetate ion is a stronger base than water. As a result,...
1.5K