Related Experiment Video
Updated: Mar 31, 2026

A Microcontroller Operated Device for the Generation of Liquid Extracts from Conventional Cigarette Smoke and Electronic Cigarette Aerosol
Published on: January 18, 2018
Laboratory Activity for the Determination of Nicotine in Electronic Cigarette Liquids using Gas Chromatography-Mass
Todd Pagano1, Morgan R Bida1, Risa J Robinson2
1Department of Science & Mathematics, Laboratory Science Technology Program, National Technical Institute for the Deaf/Rochester Institute of Technology, Rochester, NY, 14623, USA.
Abstract:
In recent years the prevalence and popularity of electronic cigarettes (ECs) has increased noticeably and a large market for their refillable nicotine solutions (e-liquids) has also rapidly increased. These e-liquids contain nicotine, an addictive and potentially dangerous stimulant, but often the actual nicotine content differs significantly from manufacturers' labelling, due in part to lack of regulation for these products. A laboratory activity for undergraduate students was developed to directly test e-liquids for nicotine content using gas chromatography combined with mass spectrometry (GC-MS) as a means for teaching the instrumentation to undergraduate students using an authentic, real-world example. The activity introduces and/or re-emphasizes the theory and operation of GC-MS, standard/sample preparation, calibration curves, internal standards, selected ion monitoring mode of MS operation, and method validation. The laboratory experiment is designed for students enrolled in Quantitative Analysis courses (like Analytical Chemistry or Instrumental Analysis), but portions are also suitable for lower level chemistry courses or even those designed for allied health professionals or non-chemistry majors. Given the current popularity of ECs, this activity can provide the chemistry curriculum with a timely, real-world, and contemporary application in which crucial course content is taught. Students can also benefit from the inherent discussion of ECs, regulations, and related social aspects of smoking and EC vaping - which can serve as a secondary learning outcome.
More Related Videos
08:39Generation of Electronic Cigarette Aerosol by a Third-Generation Machine-Vaping Device: Application to Toxicological Studies
Published on: August 25, 2018
10:44Comparing the Effects of Electronic Cigarette Vapor and Cigarette Smoke in a Novel In Vivo Exposure System
Published on: May 24, 2017
Related Concept Videos
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall....
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a...
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Types of Detectors-II
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
High-Performance Liquid Chromatography: Types of Detectors