Where are my instruments? Hazards in delivery of surgical instruments
Annetje C P Guédon1, Linda S G L Wauben2, Anne C van der Eijk3
1Department of BioMechanical Engineering, Faculty of Mechanical, Maritime and Materials Engineering, Delft University of Technology, Mekelweg 2, 2628 CD, Delft, The Netherlands. A.C.P.Guedon@tudelft.nl.
Background:
Unavailability of instruments is recognised to cause delays and stress in the operating room, which can lead to additional risks for the patients. The aim was to provide an overview of the hazards in the entire delivery process of surgical instruments and to provide insight into how Information Technology (IT) could support this process in terms of information availability and exchange.
Methods:
The process of delivery was described according to the Healthcare Failure Mode and Effects Analysis methodology for two hospitals. The different means of information exchange and availability were listed. Then, hazards were identified and further analysed for each step of the process.
Results:
For the first hospital, 172 hazards were identified, and 23 of hazards were classified as high risk. Only one hazard was considered as 'controlled' (when actions were taken to remove the hazard later in the process). Twenty-two hazards were 'tolerated' (when no actions were taken, and it was therefore accepted that adverse events may occur). For the second hospital, 158 hazards were identified, and 49 of hazards were classified as high risk. Eight hazards were 'controlled' and 41 were 'tolerated'. The means for information exchange and information systems were numerous for both cases, while there was not one system that provided an overview of all relevant information.
Conclusions:
The majority of the high-risk hazards are expected to be controlled by the use of IT support. Centralised information and information availability for different parties reduce risks related to unavailability of instruments in the operating room.
Related Concept Videos
01:30Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
01:26Standard Precaution
Hand hygiene is the most crucial means to prevent the transmission of disease. Employers are legally required to provide their workers with personal protective equipment (PPE) to minimize exposure or contact with...
01:22Healthcare Associated Infections II: Preventive Measures
The best practices for preventing healthcare-associated infections include hand hygiene, patient risk...
01:23Hand hygiene
Hand washing...
01:18Handwashing I: Introduction and Types of Equipment
Hand wash basins in clinical areas should have faucets that can be turned on and off without using the hands; that is, they should be non-touch or lever-operated....
01:19Handwashing II: Pre-procedure and Initial Procedure Steps
The hand washing procedure itself includes the following steps. First, cover cuts, if any, on hands with a waterproof dressing. Cuts and abrasions can become contaminated with bacteria hindering the ability to clean the area thoroughly. In addition, repeated hand washing can worsen an injury. The nails must be short and clean, without nail...