Biomechanical comparison of transfacet screws to lateral mass screw-rod constructs in the lower cervical spine

Transfacet screws have been used as an alternative posterior fixation in the cervical spine. There is lack of spinal stability of the transfacet screws either as stand-along constructs or combined with anterior plate. This study was designed to evaluate spinal stability of transfacet screws following posterior ligamentous injury and combined with anterior plate, respectively, and compare transfacet screws to lateral mass screw-rod constructs.

Flexibility tests were conducted on eight cadaveric specimens in an intact and injury, and instrumented with the transfacet screw fixation and lateral mass screw-rod construct at C5-C7 levels either after section of the posterior ligamentous complex or combined with an anterior plate and a mesh cage for C6 corpectomy reconstruction. A pure moment of ±2.0 Nm was applied to the specimen in flexion-extension, lateral bending, and axial rotation. Ranges of motion (ROM) were calculated for the C5-C7 segment.

ROM with the transfacet screws was 22 % of intact in flexion-extension, 9 % in lateral bending and 11 % in axial rotation, while ROM with the lateral mass screw-rod construct was 9 % in flexion-extension, 8 % in lateral bending and 22 % in axial rotation. The only significant difference between two constructs was seen in flexion-extension (5.8 ± 4.2° vs. 2.4 ± 1.2°, P = 0.002). When combined with an anterior plate and mesh cage, the transfacet screw fixation reduced ROM to 3.0° in flexion-extension, 1.2° in lateral bending, and 1.1° in axial rotation, which was similar to the lateral mass screw-rod construct.

This study identified the transfacet screw fixation, as stand-alone posterior fixation, was equivalent to the lateral mass screw-rod constructs in axial rotation and lateral bending except in flexion-extension. When combined with an anterior plate, the transfacet screw fixation was similar to the lateral mass screw-rod construct in motion constraint. The results suggested the transfacet screw fixation a biomechanically effective way as supplementation of anterior fixation.