Related Experiment Video
Updated: Mar 30, 2026

Scalable Syntheses of Graphene Oxide and Reduced Graphene Oxide using Cascade Design Oxidation and Highly Basic Reduction Reactions
Published on: July 3, 2025
Hybrid of MoS₂ and Reduced Graphene Oxide: A Lightweight and Broadband Electromagnetic Wave Absorber
Yanfang Wang1,2, Dongliang Chen1, Xiong Yin2
1College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology , Beijing 100029, P. R. China.
Abstract:
Electromagnetic wave absorbing materials that can exhibit effective absorption in a broad bandwidth at a thin thickness are strongly desired due to their widespread applications in electronic devices. In this study, hybrids of MoS2 and reduced graphene oxide (RGO) were prepared and their microwave absorption performance was investigated for the first time. It was found that a thin sample consisting of 10 wt % MoS2/RGO hybrid in the wax matrix exhibited an effective microwave absorption bandwidth of 5.72 GHz at the thickness less than 2.0 mm. The highest reflection loss of -50.9 dB was observed at 11.68 GHz for a sample with a thickness of 2.3 mm. Results obtained in this study indicate that hybrids of MoS2 and RGO are promising microwave absorbing materials, which can exhibit broad effective absorption bandwidth at low filler loading and thin thickness.
More Related Videos
09:15Iridium Oxide-reduced Graphene Oxide Nanohybrid Thin Film Modified Screen-printed Electrodes as Disposable Electrochemical Paper Microfluidic pH Sensors
Published on: November 22, 2016
13:44Simulation, Fabrication and Characterization of THz Metamaterial Absorbers
Published on: December 27, 2012
Related Concept Videos
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
MOSFET Amplifiers
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...